• Welcome to Wiseway Pellet Stove Community. Please login or sign up.
 

Wiseway installation - 3" coupler on top is too large

Started by 410customs, October 27, 2020, 11:53:36 am

Previous topic - Next topic

410customs

Hello!
Off grid up here in North Idaho
built addition on our home getting ready to install Wiseway

I picked up Duravent 3" appliance adapter only to find out the collar on top of the wiseway is the same diameter as the duravent piece???

WHAT GIVES
it should slide right on??
This is the same part Wiseway sells on their website I see everyone is using a 3-4" appliance adapter from Selkirk or Duravent
Why does mine not fit?
Was not happy to find out I need to do some fabrication

Jaron

Currently burning the Wiseway Camp Stove prototype

Marc

I'm having the exact same issue, the appliance adapter will NOT fit the vertical pipe flange on the Wiseway stove. Won't go inside even if you cut the adapter and crimp it.  Is this a manufacturing defect issue?

Jaron

Currently burning the Wiseway Camp Stove prototype

Rychehawk

Quote from: Marc on November 15, 2020, 08:18:57 amI'm having the exact same issue, the appliance adapter will NOT fit the vertical pipe flange on the Wiseway stove. Won't go inside even if you cut the adapter and crimp it.  Is this a manufacturing defect issue?

I had the same issue...I ground a little paint and a bit of metal off the chimney outlet and it slid on...but tight. It goes over the outlet not in!